Overview
Kenton KH-25A + independent temperature limiter digital display electric air blowing dryer is a drying equipment using microcomputer intelligent PID control technology, with temperature control, timing and over-temperature alarm functions. Suitable for routine experiments and tests, cost-effective, it is especially recommended to install an independent temperature limiting controller for more expensive samples to provide double insurance.
Features
1. Using microcomputer intelligent PID control technology, the system has temperature control, timing, and over-temperature alarm functions
2. The external hot air circulation system is composed of low-noise fans and air ducts. Reasonable air ducts and circulation systems stabilize the temperature in the working room
3. Cold rolled steel plate with good electrostatic spray treatment, the overall design is beautiful and novel, and has a large viewing window
4. The liner is divided into two types of mirror stainless steel and galvanized steel plate, and the semi-arc four corners are easy to clean
5. The shelf spacing and shelf number in the studio can be adjusted, which is convenient for accessing samples of different specifications
6. Use high temperature resistant silicone as the sealing edge of the door, and high temperature heating tube as the heating element to ensure safety and longer service life
7. Ergonomic fastening handle, easy to operate, and ensure sealing
Principle
The drying oven precisely adjusts the temperature through the microcomputer intelligent PID control technology, and uses the external hot air circulation system to realize the uniform circulation of hot air from the low-noise fan and air duct, so that the temperature in the working room remains stable. The high-temperature heating tube is used as a heating element to generate heat, and the high-temperature resistant silicone sealing door edge ensures that the heat is not lost.
Applications
Drying, heat treatment, heating in various industries, biology, agriculture, scientific research and other departments
Steps
1. Turn on the power supply and set the required temperature and time parameters
2. Put the sample into the studio and adjust the shelf spacing to adapt to the sample specifications
3. Start the equipment, and the microcomputer system automatically controls the temperature and timing
4. After drying, turn off the power and take out the sample
Notice
• Flammable, explosive and volatile items are strictly prohibited from being heated and dried in the box
• For heating high-value materials, it is recommended to install an independent temperature limiter and set the maximum temperature limit
• Not suitable for volatile, flammable, explosive and other items to avoid explosion
• It is recommended to use for routine experiments and tests, and it is recommended to install an independent temperature limiting controller for more expensive samples
