Overview
Kenton KH-55A + independent temperature limiter is a digital display electric air blowing dryer, suitable for routine experiments and tests, with high cost performance. The product adopts microcomputer intelligent control technology and is equipped with an external hot air circulation system to ensure stable indoor temperature.
Features
1. Using microcomputer intelligent PID control technology, the system has temperature control, timing, over-temperature alarm functions;
2. The external hot air circulation system is composed of low-noise fans and air ducts, and the reasonable air duct and circulation system make the temperature in the working room stable;
3. Cold rolled steel plate with good electrostatic spray treatment, the overall design is beautiful and novel, and has a large viewing window;
4. The liner is divided into two types of mirror stainless steel and galvanized steel plate, and the semi-arc four corners are easy to clean;
5. The shelf spacing and shelf number in the working room can be adjusted to facilitate access to samples of different specifications;
6. Using high temperature silicone as the sealing edge of the door, high temperature heating tube as the heating element to ensure safety and longer service life;
7. Ergonomic fastening handle, easy to operate, and ensure sealing.
Principle
Products through the microcomputer intelligent PID control technology implementation of precise temperature control, combined with external hot air circulation system, by low noise fan and air duct composition, to ensure uniform and stable indoor temperature. Heating element using high temperature heating tube, to provide heat.
Applications
Industry, biology, agriculture, scientific research
Steps
1. Connect the power supply;
2. Set the required temperature and time.
3. Start the equipment for heating and drying;
4. Monitor the operating status to ensure safety.
5. Turn off the power after use.
Notice
• Flammable, explosive and volatile items are strictly prohibited from being heated and dried in the box;
• For high-value materials, it is recommended to install an independent temperature limiter, set the maximum temperature limit, and double insurance;
• Not suitable for volatile, flammable, explosive and other items to avoid explosion;
• It is recommended to use for routine experiments and tests, and it is recommended to install an independent temperature limiting controller for more expensive samples.
