Overview
The Kenton DZF-6050S + Vacuum oven is a drying machine equipped with a 2L Vacuumpump. It uses a vacuum environment to reduce the boiling point of liquids. It is suitable for the rapid processing of heat-sensitive substances and samples that are not easy to dry. The equipment has an intelligent temperature control system and a variety of heating methods to choose from to ensure the efficient and safe drying process.
Features
1. Vacuum environment significantly reduces the boiling point of liquids, suitable for heat-sensitive substances and powder particle samples, effectively shortening the drying time
2. Vacuum inert conditions completely eliminate the risk of thermal explosion of oxides
3. Compared with air circulation drying oven, powder sample will not be blown away when drying
4. The liner adopts streamline arc design, Cold rolled steel plate electrostatic spraying
5. The box door is elastic and adjustable, and the integrally formed silicone rubber door sealing ring ensures high vacuum
6. Microcomputer intelligent PID control, with timing and over-temperature alarm function
7. Tempered explosion-proof double-decked Glass Door for Easy Viewing Studio
8. Provide a variety of heating methods: DZF-60 series heating on both sides, DZF-30 series independent heating on each layer, DZF-50 series 4-sided uniform heating
Principle
Vacuum ovens significantly reduce the boiling point of liquids by creating a vacuum environment, allowing heat-sensitive substances to dry rapidly at lower temperatures. Heat treatment under vacuum inert conditions prevents oxidation analysis of the sample and prevents the powder sample from being disturbed by airflow.
Applications
Biochemistry, chemical industry, agricultural research, environment protection, powder drying, baking, all kinds of Glass container sterilization
Steps
1. Put the sample to be dried into the studio
2. Adjust the tightness of the box door to ensure sealing
3. Set the required temperature and time parameters
4. Start Vacuumpump to create a vacuum environment
5. Start the heating drying process
6. Monitor the running status until completion
Notice
• Check the sealing performance of the box door before use
• The setting temperature must not exceed the upper limit of 200 ° C
• Pay attention to observe the sample status in a vacuum environment
• Regularly clean the liner to maintain hygiene
• Timely treatment of over-temperature alarm
• Pay attention to the weight of the equipment when handling (75kg)
