Overview
HUITAI DHG-9070A + test hole 50mm blast drying oven is a drying equipment for industrial and mining enterprises, laboratories, R & D institutions, etc., with drying, baking wax melting, sterilizing and other functions.
Features
1. Large-screen LCD display, one-screen display of multiple sets of data, menu-type operation interface, simple to understand and easy to operate
2. Control mode of fan speed is adopted to improve the temperature uniformity of the studio
3. Adopt the self-developed air duct circulation system to automatically discharge the water vapor inside the box
4. Adopt microcomputer temperature controller with over-temperature deviation protection and digital display, with timing function, accurate and reliable temperature control
5. The liner is made of mirror stainless steel, the shelf bracket can be freely loaded and unloaded, and the semi-circular four-corner design makes cleaning more convenient
6. Cold rolled steel plate, electrostatic spray on the surface
7. Independent temperature limit alarm system, which automatically interrupts when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents (optional)
8. With RS485 interface, the recorder and computer can be connected, and the change of temperature parameters can be recorded (optional).
Principle
Control mode and self-developed air duct circulation system are used to improve the temperature uniformity of the studio through forced convection, and automatically discharge the water vapor inside the box to achieve accurate temperature control and drying functions.
Applications
Industrial and mining enterprises, laboratories, R & D institutions
Steps
1. Connect AC 220V 50Hz power supply
2. Set temperature parameters through the large-screen LCD display menu
3. Set Timer Range 1~ 9999 minutes
4. Start the device and start working
5. Monitor temperature display and operating status
Notice
• Power supply voltage AC 220V 50Hz before use
• Set temperature must not exceed Temperature range RT + 10~ 250 ℃
• Regularly clean the liner mirror stainless steel surface
• Pay attention to the correct loading and unloading of shelf brackets
• When selecting an independent temperature limit alarm system, the temperature limit needs to be set correctly
• Special software needs to be installed when connecting the recorder and computer using the RS485 interface