Overview
PSC-30 Portable Colorimeter is a multi-functional Color measurement device designed with reference to CIE, GB and other standards. It adopts d/8 measurement structure, can perform SCI and SCE tests at the same time, is equipped with an intelligent operating system, and is powered by a large-size color touch screen and an ultra-large capacity lithium battery. It realizes one-button operation and completes measurement reading and analysis in one step. The instrument can accurately measure plane and curved surface samples. It is easy to use, fast measurement, stable performance and accurate test. It is suitable for on-site measurement and quality control of various materials.
Features
1. Color, color difference, total reflectivity and other tests are completed at one time, which is convenient and fast.
2. Equipped with an intelligent operating system and a 4.2-inch color touch screen, it is clear at a glance and easy to operate.
3. Large capacity lithium battery, large capacity memory space, easy to deal with 10,000 sets of tests, very suitable for on-site measurement and data comparison.
4, USB, WIFI communication, convenient laboratory, production line and other places of measurement and data transmission.
Principle
The product adopts a spectroscopic measurement scheme, through the D/8 ° measurement geometry, the measurement is carried out in the range of 400-700nm Light spectrum, and the SCI (including specular reflection) and SCE (excluding specular reflection) data can be obtained at the same time. The instrument calculates the Color data under various Color spaces and color difference formulas by analyzing the Light spectrum information reflected by the sample.
Applications
Spinning & weaving Printing and dyeing, coatings, rubber and plastics, consumer electronics
Steps
1. Boot up the intelligent operating system.
2. Select or set measurement parameters through the color touch screen.
3. Align the instrument measurement port with the sample to be tested (flat or curved surface).
4, one-button trigger measurement, the instrument automatically completes the test and displays the analysis results.
Notice
• Please ensure that the working Ambient Temperature is 5 ℃~ 40 ℃, the relative humidity is 20~ 85% and the non-condensing conditions are used.
• Before measurement, please select the appropriate measurement diameter according to the sample (φ 11mm or φ 8mm).
• The instrument has a built-in large-capacity lithium battery, please use it reasonably to prolong the battery life, and each charge can be measured more than 2000 times.
The instrument has a large storage space, but the maximum number of data storage is 10,000 sets. Please pay attention to managing data.
• When using USB, WIFI and other communication interfaces for data transmission, please ensure a stable connection.
