Overview
SZQ-50 (75mm) single-sided Applicator is a manual laboratory coating applicator with a film Film thickness of 50μm, a Spreader width of 75mm, and an accuracy of +/- 2μm. It is made of high-carbon chromium wear-resistant and anti-corrosion stainless steel. It is tested by imported three-coordinate dimensional accuracy before leaving the factory to ensure film accuracy. It is suitable for Moulding of paints, glues, coatings, inks, chemical New materials, etc., and can be equipped with Film Applicator for automatic film scraping.
Features
1. Made of 9Cr18Mo High Hardness Stainless Steel, it has good Abrasion Resistance and corrosion resistance, and the Hardness value reaches 50~ 55HRC.
The accuracy is up to +/- 2μm to ensure the accuracy of the experiment.
3. Smooth surface, diverse styles, wide range of applications, support for customized specifications.
4. Adopt imported three-coordinate detection accuracy, with factory inspection report, can stand Measurement.
Principle
Coating or liquid materials are manually scraped onto the substrate to form a uniform wet-film. The coating applicator is designed with specific film thickness and width to ensure precise control of film film thickness, suitable for laboratory Moulding needs.
Applications
Paints, Adhesives, Coatings, inks, Chemical New materials
Steps
1. Prepare Substrate and Coating.
2. Place the Applicator on the substrate.
3. Manual even scraping Coating.
4. Remove Applicator and check wet-film mass.
Notice
• Ensure Applicator is clean and free of contamination before use.
• Maintain uniform force during operation to avoid uneven film.
• Regularly check Applicator accuracy and calibrate if necessary.
• Avoid humid and corrosive environments when storing.
