Overview
Wet Film Thickness Wheel is a device for measuring coating wet film thickness, which is often used for quality control of coatings, paints, glues and other Spreader processes. WTW-200 stainless steel Wet Film Thickness Wheel has a measurement range of 0~ 200μm, Graduation is 10μm, diameter is 50mm, and is made of 9Cr18Mo wear-resistant stainless steel.
Features
1. Smooth without burr, surface polishing.
2. Using 9Cr18Mo high carbon chromium stainless steel, with good corrosion resistance, high hardness, Abrasion Resistance.
3. The operation is relatively simple and does not require complex equipment or skills.
4. The ability to measure Film thickness in real time when the Spreader is wet helps to detect Spreader problems early.
5. It is a powerful tool for quality control to ensure that the coating thickness meets the design requirements.
6. It is widely used in the Spreader industry and is suitable for different types of coatings and Spreader processes.
Principle
The principle of the Wet Film Thickness Wheel is based on physical measurement. It measures the film thickness of the wet coating by gently rolling the scaled roller on the wet coating surface and then reading the value on the scale. Since different coatings and applications may require different film thicknesses, the scale of the Wet Film Thickness Wheel can be calibrated according to specific coating properties and requirements.
Applications
Spreader process quality control of paint, paints, glue
Steps
1. Gently roll the Wet Film Thickness Wheel on the wet coating surface.
2. Read the value on the scale to measure the film thickness of the wet coating.
Notice
• Wet Film Thickness Wheel scales can be calibrated to specific paint properties and requirements.
