Overview
Coated 4 viscosity cup (model T-4) is a viscosity measurement tool in line with GB/T 1723 standard, widely used in the measurement of viscosity of coatings, paints, inks and other liquids with an outflow time of not more than 150 seconds. The cup body of this product is made of 6063 aluminum alloy, and the outflow hole is made of corrosion-resistant 304 stainless steel. The outflow aperture is 4mm.
Features
1. Meet national standards to ensure the accuracy and comparability of tests.
2. Suitable for coatings and coatings, helpful for quality control and product development.
3. Simple and easy to use, can quickly measure the viscosity of the liquid.
4.304 stainless steel outflow hole material, with good corrosion resistance.
Principle
The coated 4 viscosity cup is a conical cup with a small hole at the bottom. When testing, the cup is filled with the liquid to be tested, and then the cup is inverted and fixed on a bracket, and the liquid flows out through the small hole. The viscosity of the liquid can be calculated by measuring the time it takes for the liquid to flow out of the small hole.
Applications
Paints, paints, inks
Steps
1. Inject the liquid to be tested into the viscosity cup.
2. Turn the cup upside down and fix it on the bracket.
3. Measurement of the time required for the liquid to completely flow out of the small hole in the bottom of the cup.
Notice
• This product is suitable for the measurement of liquids with an outflow time of not more than 150 seconds.
• Please ensure that the cup body and flow hole are clean before use, so as not to affect the measurement accuracy.
• Please place the cup firmly upside down on the bracket during operation to ensure smooth liquid outflow.
• Please use and maintain the product correctly according to the specifications (such as flow hole diameter, capacity, etc.).
