Overview
The PUSHEN ZBQ 30-120um 4-sided Film Applicator is made of hard stainless steel and is suitable for scraping film layers of specified thickness and width on flat and solid substrates. Each film applicator comes with 4 kinds of High Accuracy fixed film thickness to ensure Accuracy, and a variety of film widths are available for customization.
Features
1. The material is stainless steel to ensure that the coating applicator is not eroded by acidic or alkaline substances in the Coating or cleaning agent.
2. Mainly used for Spreader wet-film of a certain thickness to determine the color, hiding power or preparatory sample of the sample.
3. The multi-faceted I-shaped wet-film device can be applied to 4 different film thicknesses of the Spreader.
4. Only need to change the angle to get 4 different film thicknesses, easy to operate.
Principle
4-Sided Film Applicator by scraping on a flat and solid substrate, using its 4-sided different thickness design, only need to change the angle to Spreader out the specified thickness of wet-film, used to determine the leveling of Coating, color, hiding power and other performance.
Applications
Coatings, inks, dyestuffs, powders, pigments, plastics, Printing inks, paper, ceramics, food
Steps
Place the 4-sided Film Applicator on a flat and solid substrate.
2. Select the side of the appropriate thickness as required.
3. Change the angle to select the film surface of different thickness.
4. Carry out the scraping operation, preparing the wet-film of the specified thickness.
Notice
• Ensure that the substrate is flat and firm to achieve accurate film thickness.
• Wash in time after use to avoid Coating residue affecting accuracy.
• Avoid long-term contact with strong acids or alkaline substances to prevent corrosion.
• Pay attention to the angle conversion during operation to ensure that the correct film thickness is selected.
