Overview
The PUSHEN ZBQ 100-250um 4-sided Film Applicator is made of hard stainless steel and is suitable for scraping film layers of specified thickness and width on flat and solid substrates. Each film applicator comes with four High Accuracy fixed film thicknesses to ensure Accuracy and is available in a variety of film widths for customization.
Features
1. Coating hiding power Spreader is made of stainless steel to ensure that the coating applicator is not eroded by acidic or alkaline substances in Coating or cleaning agent.
2. Mainly used for Spreader wet-film of a certain thickness to determine the color, hiding power or preparatory sample of the sample.
3. The multi-faceted I-shaped wet-film device can be applied to 4 different film thicknesses of the Spreader.
4. Only need to change the angle to get 4 different film thicknesses, easy to operate.
Principle
The 4-sided Film Applicator forms a film of the specified thickness and width by scraping on a flat and solid substrate. Four different film thicknesses can be obtained by changing the angle, which is simple and convenient to operate.
Applications
Coatings, inks, dyestuffs, powders, pigments, plastics, Printing inks, paper, ceramics, food
Steps
1. Place the film applicator on a flat and solid substrate.
2. Select the film thickness as required and adjust it to the desired thickness by converting the angle.
3. Perform a scraping operation to form a film of the specified thickness and width.
Notice
Make sure the substrate is flat and solid.
• Wash in time after use to avoid Coating residue.
• Gentle operation is required when changing the angle to prevent damage to the film applicator.
