Overview
HUIRUIPU HRP-K6000-8 split-line gas alarm controller is used to detect the content of flammability gas or toxic gas in the air, supports multiple 4-20mA signal input, and centrally controls multiple points at the same time. The system uses a microprocessor as a Control Unit. When the flammability gas concentration in the environment reaches or exceeds the preset value, the controller immediately emits sound and light alarms, and can drive exhaust or Miscellaneous peripherals through relays to prevent explosions and fire accidents, thus protecting lives.
Features
1. Support multiple 4-20mA signal inputs, allowing for centralized control of multiple points simultaneously
2. Using Microprocessor as Control Unit
3. With sound and light alarm function
4. Exhaust or Miscellaneous peripheral operation can be driven by relay
5. It can store 20,000 alarm records
6. Provide two levels of alarm points, which can be freely set by the user
7. Support data upload, using RTU-standard modbus protocol
8. Optional backup power supply: 24V 1.3AH lead-acid battery
Principle
The system uses a microprocessor as the Control Unit. By detecting the content of flammability gas or toxic gas in the air, when the concentration reaches or exceeds the preset value, the controller immediately issues a sound and light alarm, and drives the exhaust or Miscellaneous peripherals through relays.
Applications
Factories, oil depots, liquefied gas stations, gas stations, gas stations, spray booth and other places that require fire and explosion protection
Steps
1. [OK] key: enter the menu or confirm the function
2. [Up] key: Select menu item or shift operation
3. [Down] key: Select menu item or change value
4. [Exit] key: Return to the previous level menu or exit, and it is also the [Muffler] function when static.
Notice
• Operating voltage: AC220V +/- 10% 50HZ
• Working environment temperature: -10~ 50 ℃
• Working environment humidity: ≤ 95% RH
• System power: maximum power consumption 10W (no external devices)
• Detector connection: 4-20mA signal
• Wiring specifications: 3 wires need to be connected, it is recommended to use ≥ RVVP2 * 1.5 national standard Shielding wire, single core wire diameter ≥ 1.5mm, wire length ≤ 1000m
• Optional backup power supply: 24V 1.3AH lead-acid battery
