Overview
DUBAN DB25-204FM-10N Integrated Force Gauge is a small, simple and multi-functional High Accuracy Thrust and Tension Test Instrument, which is widely used in push-pull load, plug-in force test, Destructiveness test in many industries.
Features
1. High Accuracy and high resolution, digital display ignores poor.
2. N (newton), kg (kilogram), lb (pound), g (gram) four measurement units are available for selection and conversion.
3. Peak hold function, keep peak display until manually cleared.
4. It can be set to shut down automatically or manually for 10 minutes without operation.
5. It can be powered by alkaline battery or connected to 5V DC power supply.
Principle
The Digital Display Force Gauge converts physical signals into digital signals through Sensor measurement of thrust or pull, displays peak or instantaneous values on a four-digit large LCD screen, supports forward and reverse dual displays, and has High Accuracy and a variety of unit conversion functions.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Standards
Precision 0.5, accuracy +/- 0.5% FS (range) +/- 1 digital peak
Steps
1. Install the battery or connect the 5V DC power supply.
2. Select Measurement unit (N, kg, lb, g).
3. Perform a thrust or pull test, and the display displays an instantaneous value or peak.
4. When using the peak hold function, manually clear to reset.
5. After the test is completed, you can shut down manually or wait for 10 minutes to shut down automatically.
Notice
• The allowable load does not exceed 150% F.s. There will be a beep alarm when it exceeds 110% F.s.
• Operating temperature range is 0~ 40 ℃.
• The relative humidity should be less than 80%.
• The working environment requires no seismic source and corrosive medium around.
• Avoid overloading to prevent damage to the instrument.
