Overview
KRH-2 oil and synthetic liquid anti-emulsification performance tester conforms to GB7305-87 and GB/T7305-2003 standards, is used to Stir the same volume of test oil and distillation water to form an emulsion under the specified experimental conditions, and determine the time required for oil-water separation.
Features
1. High Accuracy Digital Thermostat, double-decked thermostatic bathtub, uniform temperature distribution, high temperature control accuracy.
2. Equipped with 2 digital Timers, easy to operate and accurate timing.
3. Widely used in petroleum, chemical, power and other systems.
Principle
Under the specified experimental conditions, the same volume of test oil and distillation water were formed by Stir to form an emulsion, and the time required to reach the separation (that is, the volume of the opacified layer at the oil-water interface or less than 3 ml) was measured.
Applications
Petroleum, chemical industry, electricity
Standards
GB7305-87、GB/T7305-2003
Steps
1. Prepare test oil and distillation water.
2. Set the temperature and time parameters.
3. Stir to form emulsion.
4. Timing and observing the separation process.
5. Record the time required to achieve separation.
Notice
• Power supply voltage AC220V +/- 10%.
• Check instrument temperature control accuracy and Stir speed before operation.
• Follow safety regulations and avoid use in humid environments.
