Overview
LANDTEK FM-204M Muscle Measurement Tester is a High Accuracy, high resolution measurement device, using digital display to avoid parallax, support Newton, kilogram, pound, gram four units of mutual conversion, with peak hold function, can use alkaline battery or 5V DC power supply.
Features
1. High Accuracy and high resolution measurement
2. Numbers are displayed, ignoring the difference
3. Support the conversion of four units of N (newton), kg (kg), lb (pound), g (gram)
4. Peak hold function, keep peak display until manually cleared
5. Dual power supply mode: alkaline battery or 5V DC power supply
6. Four large LCD dual display with backlight
7. Overload buzzer alarm function
Principle
Sensor measurement of muscle strength through the tester, mechanical signals into electrical signals, after processing the measurement results displayed on the LCD screen. Peak detection circuit, can capture and maintain the maximum measurement value, support a variety of units real-time conversion display.
Applications
Muscle strength testing, physical training monitoring, rehabilitation evaluation, sports medicine research
Standards
Accuracy standard: 0.5 level
Steps
1. Install 2 AA batteries or connect 5V DC power supply
2. Select the desired Measurement unit (N, kg, lb, g)
3. Perform muscle strength measurements
4. Read peak or instantaneous value display
5. Manually clear peak hold data
Notice
• Operating temperature range: 0 ° C~ 40 ° C
• Operating humidity should be less than 80%
• Avoid use in seismic source and corrosive medium environment
• The allowable load does not exceed 150% F.s, and a beep will sound when it exceeds 110% F.s
• Make sure the power supply is normal before use
• Keep equipment clean and drying
