Overview
This tester is suitable for inspection and evaluation of the combustion characteristics of plastic materials. It is designed and manufactured according to the relevant provisions of the US UL94 standard and GBT2408 standard "Flammability Test of Plastic Materials for Equipment and Appliance Components". It conducts horizontal and vertical flammability tests on plastic parts of equipment and appliances, and is equipped with a gas flow meter to adjust the flame size, simple and safe operation. This instrument can evaluate the flammability of materials or foam plastics such as: V-0, V-1, V-2, HB, HF-1, HF-2, HBF grades.
Features
1. Designed and manufactured according to UL94 and GBT2408 standards; 2. Equipped with gas flow meter, adjustable flame size; 3. Simple and safe operation; 4. Can evaluate a variety of flammability grades; 5. Test space ≥ 0.5m ³, with Glass observation door; 6. Flame application time and residual flame time can be set; 7. Combustion angle can be adjusted; 8. Flame height can be adjusted; 9. Motor drive alignment spline.
Principle
The instrument produces a standard flame through the combustion device, performs horizontal or vertical combustion tests on the plastic spline, adjusts the size of the flame with a gas flow meter, and evaluates the combustion characteristics of the material by setting the flame application and residual flame time.
Applications
Plastic parts and foam for equipment and appliances
Steps
1. Set the flame application time and residual flame time; 2. Adjust the combustion angle; 3. Adjust the flame height; 4. Use the motor to drive the positive spline; 5. Start the test and observe the record.
Notice
• Pay attention to safety during operation; • Make sure the Power supply voltage is AC 220V/50H; • Regularly check the gas flow meter and combustion device.
