Overview
The electric free Drop Tester NBC-5618B is suitable for the free falling test of small consumer electronic products and parts such as mobile phones, batteries, chargers, adaptable walkie-talkies, electronic dictionaries, building intercom phones, CDs, MDs, MP3s, etc. The machine adopts a pneumatic structure. The test piece is placed in a special fixture and clamped firmly. Press the drop button, the cylinder is released, and the test piece is tested for free fall. The drop height can be adjusted up and down with a height ruler. A variety of drop floors are available to meet different test standards.
Features
1. The box is treated with electrostatic paint, the whole machine is designed reasonably, the operation is safe, stable, accurate, and beautiful;
2. Pneumatic clamping products, the front end of the fixture is equipped with silicone rubber, so that the product is not easy to deform;
3. Test height can be jog, electric lifting mode, High Accuracy steel ruler indicates test height;
4. Equipped with a protective case, it can prevent the phone from falling and rushing out.
Principle
The machine adopts pneumatic structure, the test piece is placed in a special clamp, press the drop button, the cylinder is released, and the test piece is tested for free fall. The drop height can be adjusted up and down, and a height ruler is attached to indicate the drop height.
Applications
Mobile phones, mobile phones, batteries, chargers, adapters, walkie-talkies, electronic dictionaries, building intercom phones, CDs, MDs, MP3s and other small consumer electronics products and parts
Standards
JISC0044、IEC60068-2-32、GB2423、UL1642、UL2054、QC-T744-2006、QC-1743-2006、GB-18287-2000、SJ-11169-1998、YD-1268-2003、SJ/T11170-1998、GB8897.4-2002
Steps
1. Place the tested piece in a special fixture.
2. Adjust the drop height.
3. Press the drop button, release the cylinder, and perform a free fall test on the specimen.
Notice
• Ensure that the specimen is firmly held by the fixture;
• Pay attention to safety when adjusting the drop height;
• Check the power supply and pneumatic system before use.
• Prevent the specimen from falling out of the protective box.
