Overview
This machine is an NBC-5618B mobile phone micro-drop tester, which is suitable for small electronic consumer products such as mobile phones, telephone handsets, walkie-talkies, MP3, CD, electronic dictionaries, etc. for repeability drop test. Using Japan Shinano Motor as the driving source, the product can be repeatedly dropped to detect impact resistance.
Features
1. The number of times can be set to automatically stop
2. Using Japan's Shinano motor as the driving source, durable use
3. Adopt pneumatic components and authoritarian Control mode to improve test speed and conformity
4. Adopt display control LCD touch control panel + PLC programmable controller for action programming
5. Count at the same time, and automatically stop the test when the set number of times is reached
6. Drop surface material is aluminum, Film thickness 12mm, drop baffle reset
7. Can set the fixed value of the number of buttons, and can automatically stop the test
Principle
The motor drives the upper clamp (air finger) down to clamp the mobile phone. After rising, release the air finger, and the mobile phone will fall freely. At this time, the double-action cylinder telescopic pushes the mobile phone to the position where the clamp can be clamped. The motor drives the upper clamp down again to clamp the mobile phone. After rising, release the air finger, and the mobile phone will fall freely again, and so on until the set number of times.
Applications
Mobile phones, telephone handsets, walkie-talkies, MP3s, CDs, electronic dictionaries and other small electronic consumer products
Steps
1. Set the number of tests and parameters
2. Start the equipment, and the motor drives the upper clamp down to clamp the product.
3. Release the upper fixture after rising, and the product falls freely
4. Double-acting cylinders push the product back into place
5. Sexual repeability drop process until the set number of times is reached
6. Equipment automatically stops testing
Notice
• Ensure that the air source pressure is ≥ 0.5MPa
• Use AC 220V or designated power supply
• The test load does not exceed 2kg
• Drop height range 60~ 150mm
• Test speed range 6~ 20 times/min
• Test up to 2 phones simultaneously
