Overview
The NBC-1220S vertical plug-in life tester is a factory direct product, suitable for the insertion force and pull-out force test of various connectors. The equipment is equipped with an automatic centering device to ensure accurate plug-in force test. It adopts the Chinese interface of Windows Windows to set, and the operation is simple. All test data (test conditions, displacement, Linear dispersion diagram, life Linear dispersion diagram, inspection report, etc.) can be stored, and the fixture problem and autofocus can be solved to avoid eating unilateral problems. At the same time, it can be matched with a dynamic impedance test system to draw the load stroke-impedance Linear dispersion diagram when testing the plug-in force.
Features
1. Suitable for insertion force and extraction force testing of various connectors
2. With an automatic centering device to ensure accurate testing
3. Windows Chinese interface, simple and convenient operation
4. All test data can be stored, including test conditions, displacement, Linear dispersion diagram, etc
5. Solve the fixture problem, autofocus male and female connectors, and avoid eating unilateral
6. Can be matched with dynamic impedance test system, test insertion force and draw impedance Linear dispersion diagram
7. Support connector single Pin and plastic retention test
8. Can be connected to the contact impedance machine at the same time (optional)
9. Support various compression and tensile failure strength tests
Principle
The testing machine is driven by a ball screw drive mechanism and a Japanese Panasonic servo motor to achieve accurate displacement control. During the test, an automatic centering device is used to ensure that the male and female ends of the connector are automatically focused to avoid offset, so as to accurately measure the insertion force and pulling force. At the same time, with the dynamic impedance test system, the impedance change can be monitored in real time during the insertion and unplugging process, and the load stroke-impedance Linedispersion diagram can be drawn. All data are processed and stored by the Windows system.
Applications
Connector single hole insertion and unplugging test, connector whole row insertion and unplugging test, connector insertion and unplugging life test, connector single PIN and plastic holding force test, connector forward force test, general compression, tensile failure test
Steps
1. Connect the device to a power supply (220V/50Hz) and start it
2. Set test conditions through the Chinese interface of Windows window
3. Install the connector under test and use the automatic centering device to ensure focus
4. Select test items such as insertion force, life, or impedance testing
5. Set the measurement speed, displacement and other parameters
6. Start the test, the device automatically executes and records the data
7. After the test is completed, view and save Linear dispersion charts, reports and other data
Notice
* Power supply voltage 220V/50Hz to avoid voltage mismatch
Check fixture and connector installation before testing to prevent offset or damage
Pay attention to safety during operation and avoid touching moving parts while the equipment is running
Regular maintenance of transmission mechanism and motor to ensure equipment accuracy
When storing test data, ensure system stability and prevent data loss
* When purchasing a contact impedance machine, confirm compatibility and connect correctly
