Please contact customer service
Using Bernaut principle atomization crystalline salt, with continuous and indirect two spray modes, Temperature Uniformity ≤ 2 ℃, sample holder can be adjusted 15 °, 30 ° to ensure uniform fog, support NSS, ACSS, CASS a variety of standard tests.
Category : Salt Spray Test Chamber
Brand : AISRY
SKU : NB044725
Service :The delivery and service By NBCLab.Com
Precision salt spray test machine NBC-YW60A is a device used to test the corrosion resistance of various material surface preparation (such as paint, Eletroplating, organic and inorganic film, anode treatment, anti-rust oil, etc.). The product mass is established by simulating the salt fog environment. The equipment adopts factory direct sales mode, with fully automatic operation, humanized control interface and multiple safety protection functions.
1. Provide two modes of continuous/indirect spray, support programming automatic operation, and do not need to be on duty for one write. 2. The spray nozzle adopts the Bernute principle to absorb saline water atomization, and no crystalline salt is produced. 3. The control system uses touch-sensitive key settings and LCD control operation interface integration, allowing for upright user-friendly operation and easy access to data. 4, in line with international salt spray test operation requirements, you can choose automatic or manual mode. 5. Equipped with power outage memory function. 6. Double over-temperature protection, designed and functional to meet world standards. 7. The box is welded and formed with light gray PVC board, with a temperature resistance of 85 ° C and a firm structure. 8. The box cover adopts imported transparent acrylic impact-resistant plate, double-decked inside and outside the edge to prevent high temperature deformation. 9. Hidden integrated test barrel, easy to clean and easy to operate. 10. The pressure air bucket is made of SUS #304 stainless steel, which is resistant to high voltage and high temperature and has good thermal insulation effect. 11. The specimen frame adopts the plane indexing type, which can adjust the angle of 15 ° and 30 °. The 4-sided fog falls evenly, the test results are accurate, and the number of samples placed is large. 12, unique watertight structure, no salt fog overflow. 13. Adopting direct heating method, the temperature rise is fast, and the pure titanium heating tube is resistant to acid and alkali corrosion and has a long service life. 14. Equipped with an automatic/manual dual water filling system to prevent water shortage from damaging the instrument. 15. Equipped with a defogging system to prevent the leakage of corrosive gases from damaging Miscellaneous instruments.
The device absorbs saline water and atomization through the spray nozzle of Bernute principle to produce a uniform salt fog environment. The control system precisely adjusts the temperature of the laboratory and saturated air bucket (set according to test standards such as NSS, ACSS or CASS) to simulate corrosion conditions. The sample is placed on the sample rack with adjustable angle to ensure that the 4-sided fog is consistent to test its corrosion resistance performance. The heating system uses direct heating to quickly heat up and thermostatic, and the air supply system provides stable pressure. The whole process can be operated in fully automatic or manual mode.
Eletroplating, coating, organic and inorganic film, anode treatment, anti-rust oil, etc
JIS、ASTM、CNS、GB
1. Configure saline water and adjust pH according to test requirements (such as NSS, ACSS or CASS). 2. Place the sample on a sample holder with an adjustable angle. 3. Set the test temperature, time and other parameters through the touch LCD interface, and select the fully automatic or manual mode. 4. Start the equipment, the spray system starts to work, and the equipment automatically controls the temperature and spray volume. 5. Measurement of salt fog sedimentation (1~ 2ml/80cm ²/h adjustable). 6. At the end of the test or when the machine is stopped, use the defogging system to remove the salt fog in the box.
• Make sure the water level is normal before the equipment runs to prevent the low water level from automatically cutting off the power supply. • Pay attention to over-temperature protection, the heater power will be automatically cut off when it exceeds the temperature. • When the water level of the test drug (saline water) is low, the equipment will warn and alarm, and it needs to be replenished in time. The equipment has a leakage protection function, but it is still necessary to check the circuit regularly to prevent leakage or short circuit. • Use an automatic or manual water filling system to replenish the pressure bucket and laboratory water level in time to avoid water shortage and overtemperature damage to the instrument. • After the test and during shutdown, a defogging system should be enabled to prevent the leakage of corrosive gases from damaging Miscellaneous precision instruments. • The spray nozzle is made of special Glass, and the spray volume and angle need to be adjusted as required to avoid blockage. The sample holder has strong load-bearing capacity, but it is necessary to ensure uniform distribution when placing samples to ensure test accuracy. • The power supply of the equipment is AC 220V/50HZ, and the voltage needs to be stable. • Regularly clean the hidden integrated test barrel to keep the operation convenient and the equipment clean.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
