Overview
The electric roller testing machine is a kind of professional testing equipment used to simulate the abrasion and durability of road materials or similar materials under actual use conditions. It is widely used in the fields of road engineering, building materials research and quality control. In addition, this product is also used for the preparation of test specimens such as adhesive tape Peel Strength and holding Tack. It adheres the adhesive tape sample specification flat and evenly to the standard test substrate at a fixed pressure and speed.
Features
1. Three-station design, allowing multiple sets of tests to be conducted simultaneously
2. High roller load accuracy, up to 2000g +/- 5g
3. Stable rolling speed, 300mm/min
4. Equipped with three sets of rollers to improve testing efficiency
5. Rubber Hardness Control Accurate, Hs80 +/- 5 (Shaw A type)
Principle
By adjusting the weight, pressure and rolling speed of the roller, different types and intensities of traffic conditions are simulated. At a fixed pressure and speed, the adhesive tape sample is evenly adhered to the standard test substrate to test the abrasion and durability of the material.
Applications
Road engineering, building materials research, quality control, adhesive tape testing, airport runway material testing, parking lot material testing
Standards
CNS-11888、PSTC-8
Steps
1. Prepare adhesive tape samples and standard test substrates
2. Place the specimen on the test substrate
3. Start the equipment, and the roller is rolled at a speed of 300mm/min
4. Apply a load pressure of 2000g +/- 5g
5. After completing the rolling, take out the specimen for subsequent testing
Notice
• Power supply voltage is checked before use to meet the requirements of 1GH, AC220V, 50/60Hz
• Ensure Roller Rubber Hardness within Hs80 +/- 5
• When operating, pay attention to the roller load accuracy control within +/- 5g
• Regularly check the abrasion of the roller and replace it in time
• Keep the equipment clean to avoid dust affecting the test results
