Overview
NBC-RY200 hot press shaping machine is a factory direct sales product, mainly suitable for hot flat pressing of battery cells after winding, which is convenient for shell entry. The equipment makes the wound batteries shaped by pressurizing and heating to ensure the same thickness of the battery cells, reduce resilience, reduce the short circuit rate of the installed core, and ensure the conformity of the thickness of the finished battery cells.
Features
1. The temperature of the work surface can be adjusted by the button of the thermostat panel, and the LCD display shows the current value and the set value, which is intuitive and clear, with high temperature control accuracy and easy operation;
2. The pressure on the upper and lower working surfaces can be adjusted by a pressure regulating valve to meet the requirements of different process parameters.
3. Adopt a single station structure, with high parallelism between the upper and lower workbench panels, and a stable and reliable structure.
4. The worktop is made of high-quality materials, with good heat transfer effect, saving power consumption and improving work efficiency.
5. Equipped with a light curtain protection device, it is safe to use.
6. With abnormal temperature alarm function;
7. The hot pressing time, temperature and pressure can be adjusted.
8. Adopt automatic and semi-automatic control for easy operation.
9. Dimensions are small, saving space;
10. Appearance is exquisite, sheet metal adopts three-dimensional geometric design, simple and beautiful;
11. Electrical control can be used for automatic operation during operation, and manual functions can be used during debugging.
Principle
The device uses a thermostat and Thermocouple to control the heating tube to transfer heat to the pressure template to reach the set temperature. Under the action of the cylinder, the upper and lower templates are pressed on the battery, and the heat of the heating template is transferred to the battery, so that the battery is stably formed under a certain temperature and pressure.
Applications
After the battery is wound, it is hot and flat.
Steps
1. Place the wound battery on the template;
2. Set the temperature and adjust the pressure through the thermostat.
3. Start the equipment, and the upper and lower templates are pressed on the battery cells for heating under the action of the cylinder;
4. The battery cells are shaped under the action of temperature and pressure.
Notice
• Use light curtain protection devices to ensure safety.
• Pay attention to the abnormal temperature alarm function;
• Use manual function during debugging and automatic control during operation;
• Ensure that the gas source pressure is within the range of 0.5Mpa to 0.8Mpa;
• Regularly inspect the mechanical and electrical components of the equipment.
