Overview
PUSHEN PS 2822/3 cantilever electric Stirrer is suitable for the mixed Stir of low, medium and high viscosity liquids in the laboratory. The Stir host adopts high-quality engineering plastic body for stable operation; the output end applies a variable speed booster to increase the output torque; the running speed can be arbitrarily set, and the digital display is intuitive to ensure data collection. It has built-in soft start, automatic overload protection, and full constant power compensation.
Features
1. Adopt high-quality engineering plastic body for stable operation.
2. The output terminal applies a variable speed booster mechanism to double the output torque.
3. The running speed can be arbitrarily set according to the experimental requirements, and the digital display is intuitive.
4. It has built-in soft start, automatic overload protection, and full constant power compensation.
Principle
The Stirrer is driven by a motor, and after the torque is amplified by a variable speed booster mechanism, it drives the Impeller to mix and Stir the liquid. The user can set the required speed, and the device displays the real-time speed digitally, and has functions such as soft start and overload protection to ensure smooth and safe operation.
Applications
Laboratory Liquid Stirring
Steps
1. Place Stirrer firmly.
2. Install the appropriate Impeller according to the experimental requirements.
3. Turn on the power supply.
4. Stir the desired speed.
5. Start the device and start Stir.
6. Observe the real-time speed displayed digitally and adjust it as needed.
7. Stir, turn off the power.
Notice
• Please ensure that the equipment is firmly placed to prevent shaking during operation.
• Stir processing capacity is recommended not to exceed 60L, and the maximum recommended Stir capacity is 15L.
• Suitable for liquids with a maximum viscosity of 30000 mPa.s.
• Note that the power of the device is 240W, make sure the power supply matches.
• Please check whether the components are firmly installed before use.
Equipment has automatic overload protection, but do not overload for a long time.
Before cleaning and maintenance, be sure to disconnect the power supply.
