Overview
AMITTARI SPT-204-1T is a special instrument for the measurement of cable tension in wind towers, signal towers, power transmission systems, etc. The instrument is easy to operate, easy to carry, and provides a variety of test modes to meet different test needs.
Features
1. High Accuracy, High Resolution, Digital Display Ignore Poor.
2. Provide N (Newton), kg (kg), lb (pound), g (gram) four measurement units, and can be converted to each other.
3. With peak hold function, the peak display can be maintained until manually cleared.
4. Support the use of alkaline batteries or 5V DC power supply.
Principle
The instrument applies pressure to the rope by side pressure, and the Sensor converts the pressure signal into an electrical signal. After being processed by the internal circuit, the tensile force value (instantaneous value or peak value) is displayed in digital form on the LCD screen in real time.
Applications
Wind towers, signal transmission towers, power transmission systems
Standards
The information does not mention
Steps
The information does not mention the specific operation steps.
Notice
* The working environment requires no seismic source and corrosive medium around.
* The operation temperature range is 0 ℃~ 40 ℃, and the operating humidity should be less than 80%.
The allowable load is 150% full scale, and the instrument will emit a beep alarm when it exceeds 110% full scale.
The instrument has a 10-minute automatic shutdown or manual shutdown function.
* Do not exceed the maximum measurement range of the instrument.
