Overview
The KAIRDA N07 Microdiameter Probe is one of Ultrasonic Thickness Gauge's split Probes, dedicated to thickness measurement of thin-walled and small curved materials, suitable for different environmental conditions.
Features
1. Frequency of 7MHz for High Accuracy measurement
2. Probe diameter is 6mm, suitable for small size applications
3. Measurement range of 0.75mm~ 80.0mm (steel), covering thin wall material
4. Minimum pipe diameter is φ 15mmX2mm, support small arc measurement
5. Dedicated to thin-walled and small arc measurement, with clear characteristics
Principle
The Probe, as a split component of the Ultrasonic Thickness Gauge, calculates the thickness by transmitting and receiving ultrasonic signals, measuring the propagation time of ultrasonic waves in the material, and is suitable for good conductor materials.
Applications
Thin wall material measurement, small arc surface material measurement
Steps
1. Connect Probe to Ultrasonic Thickness Gauge Host
2. Select N07 Microdiameter Probe Mode
3. Place the Probe on the surface of the tested material
4. Read the thickness value displayed by the thickness gauge
Notice
• Only suitable for good conductor materials
• Make sure the material surface is clean before measurement
• The minimum pipe diameter is φ 15mmX2mm, do not use for smaller sizes
• Avoid use in extreme temperatures or Humidity environments
