Overview
HI1043B Strong acid/alkali Laboratory pH Electrode is suitable for the measurement of conventional laboratory strong acid, strong alkali, Coating, seawater and other samples.
Features
1. Glass material manufacturing
2. Double ceramic dialysis hole design
3. Spherical Electrode Head Diameter 9.5mm
4. Use 3.5M KCl filling solution
5. BNC connector, 1 meter cable length
Principle
Electrode measurement of the pH value in the sample through the Glass Induction Membrane, double ceramic dialysis holes allow the electrolysis solution to exchange ions with the sample, thus accurately measuring the pH value of strong acids, strong bases and other samples.
Applications
Conventional laboratory strong acid, strong alkali, Coating, seawater and other samples
Steps
1. Remove the Top Protective Cover and Check the Entire Electrode
2. If salt crystals form, rinse with water
3. If there are bubbles, gently shake Electrode to remove
4. Electrode drying, soak in HI70300 Electrode preservation solution for at least 1 hour
5. Frequent soaking of preservation liquid Counter electrode is beneficial
Notice
• The protective cover should be removed for inspection before use of the new Electrode
• Electrode internal electrolysis evaporation formed salt crystal does not affect the use, just rinse with water
• Electrode bubbles generated during transportation can be removed by flicking
• Electrode drying needs to be soaked in preservation solution to restore wetness
• Regular soaking of preservation solution can prolong Electrode life
