Overview
The HANNA HI 2030-02 Benchtop Conductivity Meter is a High Accuracy conductivity measuring instrument configured with HI763100 conductivity dedicated Electrode. Measurement range covers 0.00 to 500.0mS/cm with an accuracy of +/- 1 %（ +/- 0.05 μS/cm) or 1 word. It supports automatic recognition of standard fluid calibrate and multiple Data storage modes for laboratory and industrial environments.
Features
1. Equipped with HI763100 conductivity dedicated Electrode, built-in temperature sensor four-ring design to ensure measurement Stability and accuracy.
2. Automatically identify 5 standard liquid calibrating and Conductivity detector constant correction to simplify the operation process.
3. Provide three data storage modes: manual, manual continuous and time interval, which can store up to 1000 sets of data.
4. Support automatic/manual selection of range and EC/TDS/NaCl reading mode, flexibly adapt to different measurement needs.
5. ATC automatic temperature compensation or off compensation function to ensure conductivity Measurement accuracy.
6. GLP record calibrates date, time, Conductivity detector constant, etc., for easy data traceability and management.
7. EC and TDS conversion factor adjustable, support temperature correction.
8. Provide three options of% NaCl, PSU and g/L seawater salinity units to meet diverse applications.
Principle
Based on the conductivity Measurement principle, the Conductivity Meter detects the conductivity of the solution via HI763100 Electrode and uses a built-in temperature sensor for automatic temperature compensation. The instrument calibrates by automatically identifying the standard solution to ensure measurement accuracy and supports conversion and display of various parameters such as EC, TDS and salinity.
Applications
Laboratory water quality analysis, industrial process control, environment monitoring, seawater salinity measurement, food and beverage industry, pharmaceutical industry
Steps
Connect HI763100 Electrode and Power Adapter.
2. Select EC, TDS or salinity Measurement mode after power on.
3. Use the automatic identification function to calibrate the standard liquid or manually set the calibrating point.
4. Electrode is immersed in the solution to be tested, and the instrument automatically displays the measurement results.
5. Select Data storage mode as required (manual, manual continuous or time interval).
6. Export the storage data through the USB interface.
Notice
• Electrode cleaning before use to avoid contamination affecting Measurement accuracy.
• Recommended standard fluids, such as HI7037 seawater standard, should be used when calibrating.
• Pay attention to the temperature compensation setting when measuring. Measurement range may be limited when turning off compensation.
• Maximum capacity to store data and back up important data regularly.
• Instrument Operating Environment Temperature should be 0-50 ℃, Humidity should not exceed 95% RH, no condensation.
• Power Adapter needs to match 230AC/5VDC specifications to prevent voltage instability from damaging the equipment.
