Overview
Laminating Coater is a roll-to-roll machine, suitable for water-based adhesive Spreader paper, film, aluminum foil, plastic, non-woven fabrics and other non-elastic materials. The equipment consists of a body, a gluing width adjustment device, a discharge rack, a coating roller group, a thickness adjustment dial, a transmission platform, a traction roller group, and a transmission mechanism. It has the characteristics of high bonding accuracy and adjustable application width.
Features
1. The body adopts aluminum alloy and high electrostatic spray plate, and the structure is sturdy and durable.
2. The gluing width adjustment device is composed of food-grade plastic and adjustable braces, with flexible adjustment.
3. Equipped with two discharge racks with automatic deviation correction device to ensure material alignment.
4. The coating roller group is made of double-drum precision machining parts, with smooth transmission.
5. The bonding speed is adjustable from 1 to 10m/min, and the bonding accuracy is up to 0.5mm.
6. Drying Temperature range RT +~ 200 ℃, Drying length 1m, Power 3KW.
Principle
The equipment adopts roll-to-roll Laminating process, and completes Spreader through unwinding, Spreader, drying, bonding, and tape correction. Spreader is evenly applied to the surface of the material by the coating roller group, and the drying channel is dried. The deviation correction device automatically adjusts the material alignment to ensure Spreader accuracy.
Applications
Paper, film, aluminum foil, plastic, non-woven fabric and other non-elastic materials
Steps
1. Unwinding: Place the material on the discharge rack.
2. Spreader: Spreader water-based glue by applying roller group.
3. Drying: The material enters the drying tunnel for drying treatment.
4. Fitting: Material bonding is performed on the transmission platform.
5. Winding: Winding is completed through the winding device, and the deviation correction device automatically adjusts the alignment.
Notice
• Power supply voltage of the equipment is 220V, Power 2KW, make sure the power supply matches when using it.
• The adjustable range of the bonding width is 100 to 300mm, and the maximum width must not be exceeded during operation.
• The drying tunnel temperature can reach up to 200 ° C, pay attention to safe operation.
• The coating thickness range is 0.005-3mm, which needs to be adjusted according to the material characteristics.
• Dimensions of the equipment are about 2200 * 1000 * 1650mm, and enough space should be reserved during installation.
