Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is a bar type Automatic film applicator with Vacuum chuck function, the new bar Installation method greatly improves the efficiency of Spreader, is easy to clean, supports speed control and application length adjustment, is suitable for laboratory High Accuracy automatic film, Moulding proofing in university research institutes, New material, lithium battery, glue, Resin and other laboratories.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. With heating and Vacuum chuck function
4. High Accuracy film applicator, original imported bar film uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. High Accuracy film is realized by using bar coating method, fixing the substrate by Vacuum chuck, and combining with precision Control system.
Applications
Coatings, inks, paints, Stock, Lithium Batteries, Resin, Glue, Polymer Materials, Pharmaceuticals and other film sample preparation
Steps
1. Prepare the substrate and samples
2. Place the substrate on the Spreader table and start Vacuum chuck fixation
3. Set application length and Spreader speed parameters through Touchscreen
4. Install the right bar film applicator
5. Start the film program, the device automatically completes the Spreader process
6. After the Spreader is completed, remove the sample for subsequent processing
Notice
• Please read the instruction manual carefully before operation
• Power supply voltage matches equipment requirements
• Check whether the bar is firmly installed before Spreader
• Keep the coating table clean to avoid impurities affecting the film mass
• Regularly check the working status of the Vacuum chuck system
• Do not touch moving parts during equipment operation
