Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is a drawdown blade type Automatic film applicator with heating and Vacuum chuck function, innovative bar Installation method and clamshell drawdown blade head greatly improve Spreader efficiency, easy to clean, support speed control and application length adjustment, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, electricity, glue, Resin, etc.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. With heating and Vacuum chuck function
4. Flap drawdown blade design, cleaning fast and convenient
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
7. Servo motor, stable operation, higher film accuracy
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. High Accuracy automatic film is realized by using Blade Coating mode, driven by servo motor, combined with Vacuum chuck to fix the substrate.
Applications
Moulding proofing in laboratories of university research institutes, New materials, lithium batteries, glues, Resin, Coatings, inks, paints, Stocks, Pressure sensitive adhesives, polymer materials, pharmaceuticals, etc
Steps
1. Place the substrate on the Spreader table and fix it by Vacuum chuck
2. Set application length and Spreader speed parameters as needed
3. Start the film process via the Touchscreen control panel
4. After the film is completed, remove the sample for subsequent processing
Notice
• Ensure that the equipment power supply meets the requirements before use (220V/50HZ or customized voltage)
• Pay attention to the heating Temperature range during operation to avoid overheating
• Regularly clean the clamshell drawdown blade to keep the equipment clean
• Vacuum chuck function ensures that the substrate is placed flat when used
• Spreader parameter settings need to be adjusted according to specific material characteristics
