Overview
HuiNuo Ceramic Frame Applicator is a manual laboratory film applicator made of zirconia ceramics, specially designed for Moulding proofing of corrosion materials such as strong acid and alkali. This model is frame type, providing 50μm, 100μm, 150μm, 200μm four wet film thickness options, the effective application width is 80mm, and the total length of the Applicator is 90mm.
Features
1. Using zirconia ceramic material, it has good Abrasion Resistance and corrosion resistance, and is dedicated to Moulding proofing of materials with strong corrosion.
2, with a variety of styles, such as work type, frame type, can be customized with different film thickness and application width.
3. Adopt imported three-coordinate detection accuracy, with factory inspection report, can stand Measurement.
Principle
This product is a manual laboratory film applicator that uses its precise gap thickness to form a wet-film coating of a specified thickness on a substrate by placing the Applicator on the substrate and manually scraping. It can be used with the Film Applicator to automatically scrape the film.
Applications
Laboratory Moulding proofing, corrosion material film prepative
Standards
Before leaving the factory, it is tested by imported three coordinates to ensure dimensional accuracy
Steps
1. Applicators with suitable wet film thickness are selected according to requirements.
2. Place the Applicator on a flat substrate surface.
3. Place the material to be coated in front of the Applicator.
4. Using a drawdown blade or matching Film Applicator, scrape the Applicator at a uniform speed to form a wet-film on the substrate.
5. Remove the Applicator and complete the film.
Notice
• This product is made of ceramic and needs to be customized. Please communicate with technical customer service for specific needs.
• Pay attention to avoid bumping when using and storing to prevent damage to the ceramic edge.
• Ensure that the substrate surface is flat for a uniform film effect.
The scraping speed should be kept uniform to affect the accuracy of film thickness.
• It should be cleaned in time after use to avoid residual corrosion or clogging of the gap.
