Overview
Rxg-01/1000 small oven coil Coater is a roll-to-roll small Spreader Laminating machine with 1 meter drying tunnel, with the functions of rewinding and unwinding, scraping, 1 meter drying tunnel and overlaying. The effective application width is adjustable from 100-1000mm, with accuracy +/- 10%, suitable for hot-melt adhesives, polyether sulfone, pes particles and other materials.
Features
1. Spreader accuracy +/- 10%, the effective application width 100-1000mm adjustable; 2. Coating speed 0-20m/min adjustable, bonding speed 1-10m/min; 3. Drying Temperature range RT +~ 200 ℃, drying length 1m; 4. Glue thickness 0.005-3mm adjustable; 5. Equipped with a deviation correction device to automatically adjust material alignment; 6. The body adopts aluminum alloy and high electrostatic spray plate, the structure is sturdy and durable.
Principle
The machine scrapes through the coating roller group, and the thickness of the Spreader is controlled by the thickness adjustment dial table. The substrate enters the gluing process through the discharge rack, is smoothly transmitted to the drying tunnel through the transmission platform, and then is pulled by the traction roller group to complete the coating and winding. The deviation correction device automatically adjusts the material alignment during the coating process.
Applications
Hot-melt adhesive Spreader, polyether sulfone Spreader, pes particle Spreader
Steps
1. Place the substrate on the discharge rack; 2. Adjust the glue width and thickness to the required parameters; 3. Start the equipment, and the substrate is scraped by the coating roller group; 4. The substrate enters the drying tunnel through the transmission platform; 5. The traction roller group pulls the substrate to complete the coating; 6. Winding completes the Spreader process.
Notice
• The application width and thickness adjustment should be operated according to the indicator; • The hand wheel should be tightened to ensure that the rubber ring is in contact with the lower roller during the operation of the traction roller group; • The material alignment should be paid attention to during the operation of the equipment, and the correction device should be automatically adjusted; • The coating speed and the bonding speed should be set within the adjustable range; • The drying tunnel temperature should not exceed 200 ° C.
