Overview
Oven coil automatic composite Coater is a multi-functional composite equipment, suitable for Spreader paper, film, aluminum foil, plastic, non-woven fabrics and other non-elastic materials. The equipment integrates unwinding, scraping, drying, overlaying and rewinding functions, and adopts reticulated roller painting cloth head to achieve efficient automatic operation.
Features
1. Adopt reticulated roller painting technology to ensure uniform and accurate Spreader
2. Servo motor control, bonding speed 1~ 10m/min adjustable, high accuracy
3. Temperature range RT +~ 200 ℃, adjustable drying conditions
4. The heating temperature of the laminating roller reaches 200 ° C to ensure that the composite film is firmly gluing
5. Spreader thickness range is wide, 0.005-3mm adjustable
6. Compact equipment, Dimensions about 1800 * 800 * 1600mm, saving space
7. Power supply voltage 220V, Power 2.5KW, energy saving and efficient
Principle
The device stably conveys the substrate through the unwinding device, uses the anilox roller to uniformly Spreader the molten polyethylene (PE) plastic on the surface of the substrate through the scraping system, and then enters the drying system to cure the Spreader layer, and then passes through the composite device under heating conditions. Composite with another layer of substrate, and finally the winding device completes the film roll collection.
Applications
Paper, film, aluminum foil, plastic, non-woven fabric
Steps
1. Place the substrate reel in the unwinding device
2. Start the equipment, the substrate is scraped by the system Spreader
3. Spreader substrate into the drying system curing
4. After curing, the substrate is compounded with another layer of substrate in the compounding device
5. The composite completed film roll is collected by the winding device
Notice
Make sure the substrate is non-elastic
• The bonding speed is controlled within the range of 1~ 10m/min
• The temperature of the drying tunnel and laminating roller does not exceed 200 ° C
• The application width adjustment does not exceed 300mm
• Regularly check the tensioning device and roller status
