Overview
CY-SPC4-PMMA spin Coater through miniaturization design, the whole adopts aluminum alloy structure, acrylic cavity, Appearance is beautiful and sturdy. The instrument adopts advanced precision motor, the highest Rotation speed can reach 8000 rpm; the control relies on buttons and high-brightness LCD screen, in addition to direct homogenization, it can also pre-store homogenization Linear dispersion for program-controlled homogenization. The instrument effectively guarantees the performance and function of the instrument under the premise of greatly reducing the volume, which is very suitable for laboratory purchase.
Features
1. Miniaturized design, the overall use of aluminum alloy structure, acrylic cavity, Appearance beautiful and sturdy
2. Using advanced precision motor, the maximum Rotation speed can reach 8000 rpm
3. Control relies on buttons and highlighted LCD screen
4. In addition to direct homogenization, it can also pre-store homogenization Linear dispersion for programmable homogenization
5. Guarantee instrument performance and functionality while reducing volume
Principle
The spin Coater can coat liquid or colloidal materials on substrates such as silicon wafers, crystals, quartz, ceramics, etc., to form a thin film, and distribute the material evenly on the surface of the substrate through high-speed swirl/spin.
Applications
Photoresist spin coating, bio-foster base fabrication, sol-gel method of polymer film fabrication
Steps
1. Prepare substrates with a diameter of ≤ 4 inches
2. Manual glue drop or use precision injection pump glue drop
3. Set homogenizing parameters or select pre-stored homogenizing Linear dispersion
4. Start the homogenizing process
5. Remove the substrate after completing the homogenization
