$ 1054.00Ex works
Multi-coil structure design, protective layer thickness Measurement range 1-185mm, accuracy +/- 1mm, with four scanning modes and ultra-dense rib resolution, support one-hand grip operation.
Category : Other Adhesion Testers
Brand : KOSON
SKU : NB045994
Service :The delivery and service By NBCLab.Com
The KOSON integrated steel bar scanner KS-71G is mainly used for testing the position of steel bars inside concrete structures, the thickness of the protective layer, the spacing of steel bars and the diameter of steel bars, and can accurately draw the overall steel bar distribution map and quickly provide High Accuracy detection data. The host and Sensor adopt an integrated structure, which is convenient and fast to carry and operate on site; the multi-coil structure design is used, which is faster, higher accuracy and stronger resolution.
1. Each detection mode is intuitive and accurate, and accurately displays the position, spacing and thickness of the steel bar on the same display screen 2. Four modes of single point measurement, grid scanning, waveform scanning and profile scanning are completely realized in the measurement process. Turn the page back and forth to view the data and graphics, and go back and delete the wrong test data at any time 3. JGJ detection mode to achieve a single bar 1-6 times, repeability test, automatic calculation of the average 4. The grid scan fully realizes the arbitrary interleaving of X-axis and Y-axis testing during the test process, without affecting the test data 5. After random switching, the data and steel distribution map will automatically continue the previous information for testing, improving the flexibility of on-site testing 6. Adopt single-hand grip, operation design and four-wheel positioning method, equipped with high-strength wear-resistant tires, easy to protect the instrument abrasion 7. Adopt automatic storage calibration value to realize fast measurement and reduce the troublesome procedure of each calibration work before detection 8.2.8-Inch high-resolution color LCD screen (320 × 240 pixels), the detection data can be clearly seen in any situation indoors and outdoors 9. Multi-coil structure design, faster speed, higher accuracy and stronger resolution 10. Using USB mode data transmission and charging, the stored data can be quickly uploaded to the computer through the USB cable 11. Using built-in large-capacity lithium battery, the design power consumption is low, and the normal standby time is about 16 hours when the battery is fully charged. 12. Data storage, viewing, deletion and other functions in the data management mode can store about 200,000 steel measuring point data 13. Adopt super-dense bar resolution ability to solve the problem of steel bar leakage 14. Standard calibrated test blocks with professional unique design can be configured 15. Host and Sensor coil integrated design, small size, light weight, easy to carry 16. The middle position of adjacent steel bars is judged in real time, and the indicator light prompts to avoid the surrounding steel bars, which is convenient for drilling and coring 17. The protective lining of the instrument box adopts novel steps and cylindrical diversion grooves, which are convenient for instrument placement 18. Equipped with steel bar detection software, it is convenient to perform professional Data analysis, data processing and generate complete reports on PC
The instrument adopts electromagnetic induction detection technology, and realizes accurate detection of the position, thickness of protective layer, spacing and diameter of steel bars inside the concrete structure through multi-coil structure design.
Detection of steel bars location, distribution and direction of steel bars, thickness of protective layer, diameter of steel bars in concrete structure engineering, construction mass acceptance inspection of concrete structures of buildings, inspection and inspection of steel bars in bridges, tunnels and other structures, safety and durability evaluation of structures under construction, inspection of reinforcement amount during evaluation and renovation of old structures
"Concrete structure engineering construction mass acceptance code" GB 50204-2015, "concrete structure site detection technology standard" GBT50784-2013, "concrete reinforcement detection technology regulations" JGJ/T152-2008, "building structure detection technology standards" GB/T50344-2004, "electromagnetic induction method to detect the thickness of steel protective layer and steel diameter technical regulations" DB11/T365-2006, "steel protective layer thickness measurement instrument, floor thickness measurement instrument Measurement calibrated code" JJF1224-2009
1. Select detection mode: single point measurement, grid scan, waveform scan, profile scan or JGJ detection 2. Perform calibration settings, and the instrument can automatically store the calibration value 3. Start measurement, data collection according to selected mode 4. In the measurement process, you can turn the page back and forth to view the data and graphics 5. You can go back and delete the wrong test data at any time 6. The X-axis and Y-axis test directions can be switched arbitrarily during grid scanning 7. After completing the measurement, upload the data to the computer via the USB cable 8. Data analysis and report generation using companion software
• Operating temperature range is -10 ℃~ + 42 ℃, beyond this range may affect instrument performance • The instrument is powered by a built-in lithium battery and needs to be charged regularly to ensure normal use • Before use, confirm that the instrument has been correctly calibrated to ensure Measurement accuracy • In areas with dense steel bars, attention should be paid to instrument prompts to avoid misjudgment • When placing the instrument box, pay attention to the direction of the ladder and cylindrical diversion groove • Make sure the USB connection is stable during data transmission • The instrument has an automatic shutdown function, and the shutdown time can be set according to needs • Keep the instrument moving smoothly during measurement to avoid violent vibration
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
