Overview
MS-D25 laboratory online high shear dispersion Mulser high efficiency, lightweight, modular structure, easy to operate, can operate for a long time, easily meet a variety of high-demand dispersion emulsification experiments. It can simulate online working conditions in the laboratory for cyclic or online continuous processing, with homogeneous, no dispersion dead angle and other characteristics.
Features
1. High-speed motor imported from Germany, long-life design, can run continuously for 4 hours or more
2. Stepless speed control system, Rotation speed up to 28000rpm, 27m/s shear line speed
3. The whole machine has a reasonable structure design, excellent material selection, and is lightweight to use
4. Equipment height Modular design: online working head cavity body
5. Overload protection, double protective insulation
6. The working head is made of stainless steel, which can be used with repeability and can be assembled flexibly
Principle
The equipment drives the working head swirl/spin through a high-speed motor to generate a high shear force to realize the dispersion and emulsification of materials. It can simulate online working conditions in the laboratory for cycle or online continuous processing.
Applications
Dispersion and emulsification of materials in biological, food, Coatings, inks, Spinning & weaving auxiliaries, cosmetics, lubricants, pesticides and other industries
Steps
1. Assemble the working head and cavity
Step 2 Connect the power supply
3. Adjust the stepless speed regulation system to the required Rotation speed
4. Start material handling
5. Turn off the power after processing
Notice
• Material viscosity must not exceed 5000cps
• Ambient Temperature should be kept in the range of 5-40 ℃
• Environmental humidity shall not exceed 80%
Make sure the equipment is well insulated before use
• Pay attention to the status of overload protection function
• Regularly check the abrasion of the working head
