Overview
The 25DF cutter head is an accessory product under the HUXI brand with model 20040034, which is specially designed for HR500, HR-500D, HR-25 and HR-25D equipment. The standard processing capacity of the cutter head is 100~ 5000ml, and the maximum processing viscosity is 5000CP. It is suitable for dispersion processing of medium and high viscosity samples.
Features
1. Standard Processing capacity range, covering 100~ 5000ml
2. Maximum processing viscosity up to 5000CP, suitable for high viscosity materials
3. Designed for HR500, HR-500D, HR-25 and HR-25D equipment
4. Model 20040034, the order number is clear, which is convenient for procurement
Principle
The 25DF cutter head generates shear force through high-speed swirl/spin, and efficiently disperses and emulsifies materials in the processing capacity range of 100 to 5000ml. Its special design can handle materials with viscosity up to 5000CP, ensuring uniform mixing of samples.
Applications
Laboratory sample dispersion, chemical material mixing, high viscosity liquid treatment, scientific research experiments
Steps
1. Confirm device model compatibility (HR500, HR-500D, HR-25 or HR-25D)
2. Install the 25DF cutter head to the host
3. Set the processing parameters to ensure that the Processing capacity is within the range of 100~ 5000ml
4. Start the device for decentralized processing
5. Turn off the equipment and clean the cutter head after completion
Notice
• Please confirm that the viscosity of the material does not exceed 5000CP before use
• Processing capacity should be controlled within the standard range of 100~ 5000ml
• Only for compatible HR series devices
• Clean and maintain in time after use
• Avoid overload operation to prolong service life
