Overview
The HUXI HX-N model accessory is a 15-hole × 10ml capacity adapter module specially designed for Centrifuge, with a maximum Rotation speed of 600rpm and a temperature resistance of 100 ° C. The accessory can be used with a variety of thermostatic modules (such as 4-degree electronic ice box, thermostatic metal bath, intelligent thermostatic metal bath) for laboratory Sample Handling.
Features
The capacity is designed to be 15 wells x 10 ml to meet the centrifugation requirements of medium-sized samples.
2. Rotation speed 600rpm to ensure efficient separation.
3. High temperature resistance 100 ℃, compatible with high temperature operating environment.
4. A variety of thermostatic modules can be selected to enhance experimental flexibility.
Principle
This accessory acts as a Centrifuge adapter to separate components of different densities in the sample using centrifugal force at high speed swirl/spin by fixing a 10 ml centrifuge tube on the rotor. Its high temperature resistant design allows stable operation at 100 ° C, ensuring the safety of Sample Handling.
Applications
Laboratory sample centrifugation, biochemical experiments, medical testing, scientific research and education
Steps
1. Install the HX-N accessory onto a compatible Centrifuge rotor.
2. Place a 10ml centrifuge tube into the 15 well positions of the fitting.
3. Make sure the lid (such as high cover 20060040) is properly sealed.
4. Set Centrifuge parameters, including Rotation speed not exceeding 600rpm.
5. Start the Centrifuge and remove the sample after completing the operation.
Notice
• Rotation speed must not exceed 600rpm to avoid damage to accessories.
• Operating temperature should not exceed 100 ° C to prevent material deformation.
• Check the integrity of accessories before use to ensure no crazing.
• Use only with compatible Centrifuges and modules.
• Follow laboratory safety procedures and wear appropriate protective equipment.
