Overview
Hypertherm electronic tension meter HF-30K is a digital electronic Force Gauge, with the first peak hold function, the maximum load value is 30KN. It can cooperate with Hypertherm electric testing device to realize various new practical functions such as pull-off and stop, force hold, fatigue test, etc. It can set the gravity acceleration value and store 200 sets of test data.
Features
1. Digital display design, intuitive reading
2. With first peak hold function
3. Maximum load value 30KN
4. It can cooperate with the electric testing device to realize the functions of pulling off and stopping, force holding, fatigue test and so on
5. Gravity acceleration value can be set
6. Can store 200 sets of test data
7. Choose from a variety of Measurement units (N, kgf, lbf, etc.)
8. Support multiple Operating Modes (weight tracking mode, peak hold mode, first peak mode, button dedicated mode)
Principle
The push-pull force signal is detected by the external Sensor, and the Measured value is displayed after processing by the digital display system. Supports a variety of Operating Modes, including tracking mode to display the force value in real time, peak holding mode to record the maximum force value, first peak mode to record the first peak, and key-specific mode to trigger the measurement through the button.
Applications
Chemical, Machinery, Construction, Electronics, Hardware, Auto Parts, Fire Protection Devices, Scientific Research Institutions
Steps
1. Select the appropriate Operating Mode (Track, Peak, FIR-PEAK, KEY-PEAK)
2. Measurement unit (N, kgf, lbf, etc.)
3. Perform a pull or thrust test
4. Read the test value of the display window
5. Check the stored data number when needed
6. Pay attention to the battery power indicator and charge it in time.
Notice
• When the battery level shows that it is very small, charge it in time.
• It will automatically shut down when the battery is empty.
• The working environment should be free of vibration and corrosion medium
• Operating temperature range is 0~ 40 ℃
• Storage Temperature range -20~ 70 ℃
• relative humidity range of 15%~ 80% RH
• The "down" symbol is displayed during tensile testing, and the "up" symbol is displayed during thrust testing
