Overview
The VC-118-S camera test light box is a special light box specially designed for camera testing, which can test cameras with different field of view angles under the same picture card. The built-in mobile slide is easy to move the camera back and forth, and the LED Illuminant with high display finger, no stroboscopic, long life and stable Color temperature is equipped. Users can move back and forth and swirl/spin the Illuminant light board left and right for a more uniform lighting environment.
The light box is mainly composed of a box, an Illuminant control box, and a bracket. The back plate can post 2 times (712mm * 400mm) ISO12233 standard test cards, and also supports wide-angle lens and fish eye lens test cards. All cards can be placed at any position with magnetic tape on the back.
Features
1. Color of the box surface is neutral gray
2. Install a black cloth curtain at the window, which is easy to open and close, and close during work to ensure that the internal environment is not affected by the outside
3. A camera mobile platform is installed in the middle of the box, and two locked linear slides are installed under the platform, which can be moved back and forth and locked and fixed
4, the mobile platform on the left and right sides of the installation of high display finger, standard Color temperature, no stroboscopic LED Illuminant, adjustable illuminance, Illuminant light board installed under the lock linear slide can be moved back and forth and locked fixed, release the butterfly hand nut can swirl/spin adjust the Illuminant angle to make the light more uniform, to determine the angle after tightening fixed
Principle
Through the built-in movable slide and adjustable LED Illuminant system, the camera can be moved and positioned in the light box, Illuminant can be moved and swirl/spin angle, with the test card on the backplane, providing a stable and uniform camera test. The lighting environment ensures accurate and reliable test results.
Applications
Camera test, wide-angle lens test, fish eye lens test
Steps
1. Post the test card anywhere on the back plate of the light box
2. Move the camera platform back and forth as needed and lock the slide rail to fix it
3. Adjust the position and angle of the LED Illuminant, move the Illuminant light board back and forth and lock it, swirl/spin the light board to make the light uniform and then tighten the butterfly nut
4. Close the window curtain and start the test
Notice
• Operating Environment 0-40 ℃, relative humidity below 85% (non-condensing)
• Input voltage is AC220V, 50/60Hz, Maximum Power Consumption 160W
• Net weight of equipment 130kg, pay attention to safety when handling
• Make sure the curtain is closed during the test to avoid external rays of light interference
• Be sure to tighten the butterfly nut fixing position after adjusting the Illuminant angle
