Overview
HuiNuo CP2000-D Stirrer is a professional mixing equipment, suitable for mixing inks, Coating and other materials. The equipment adopts stainless steel Mixing Tank, which has the characteristics of simple operation and high mixing efficiency. It can thoroughly mix inks in 10 minutes without heating up.
Features
1. Simple and convenient operation
2. Low-speed, intermittent mixing with barrel edge
3. Professional Impeller design, inks are flipped and cut during the mixing process, and inks can be thoroughly stirred evenly within 10 minutes
4. The inks after stirring do not heat up
5. Easy Replacement of Mixing Tank (Stainless Steel Barrel)
6. stirring speed variable frequency speed regulation
Principle
The Stirrer uses the low-speed, intermittent barrel edge sticking Mixing method, combined with the professionally designed Impeller, to flip and cut inks and other materials to achieve efficient and uniform mixing. The variable frequency speed regulation function can flexibly control the stirring speed to ensure that the stirring process is stable and does not heat up.
Applications
Inks Factory, Coating Factory, Chemical Factory, Printing Factory, Screen Printing Factory, Circuit Board Factory, Garment Factory
Steps
1. Install the Mixing Tank on the device
2. Set the variable frequency speed regulation parameters as required
3. Start the equipment for low-speed, batch mixing
4. Turn off the equipment after mixing is completed
5. Replace or Clean Mixing Tank
Notice
• Make sure the power supply meets the rated requirements before operation (single-phase 220V)
• Pay attention to the installation of the Mixing Tank firmly during the mixing process
• Regularly check the operating status of the equipment
• Make sure the equipment has stopped running when replacing the Mixing Tank
• Avoid overloading equipment
