Overview
HuiNuo CP5000-D Stirrer is a new generation of products designed to meet market demand and higher customer requirements. Simple and convenient operation, low-speed, intermittent barrel edge Mixing method, unique Impeller design makes inks flip and cut during the mixing process, can be thoroughly stirred within ten minutes without heating up, support easy replacement of stainless steel Mixing Tank and frequency conversion speed regulation.
Features
1. Simple and convenient operation
2. Low-speed, intermittent mixing with barrel edge
3. Unique Impeller design for inks flipping and cutting
4. Mix thoroughly within ten minutes
5. The inks do not heat up after stirring
6. Easy Replacement of Stainless Steel Mixing Tank
7. stirring speed variable frequency speed regulation
Principle
Mixing method of low speed and intermittent sticking to the barrel edge, combined with the unique design of Impeller, flips and cuts the inks during the mixing process to achieve fast and uniform mixing.
Applications
Inks Factory, Coating Factory, Chemical Factory, Printing Factory, Screen Printing Factory, Circuit Board Factory, Garment Factory
Steps
1. Place the Mixing Tank at the Stirrer location
2. Set frequency conversion speed regulation parameters according to requirements
3. Start Stirrer for low-speed, batch stirring
4. Turn off the equipment after mixing is completed
5. Replace the Mixing Tank for the next batch operation
Notice
• Ensure that the Mixing Tank volume is used in the range of 3KG to 50KG
• Check whether the input voltage is 220V, 50HZ before operation
• Regularly check the operating status of the equipment
• Make sure the equipment has stopped running when replacing the Mixing Tank
• Keep the working environment clean and drying
