Overview
Pilot-scale coil Automatic film applicator Rgd-02/300cl is a small laboratory Spreader equipment, which consists of a body, a gluing width adjustment device, a discharge rack, a coating roller group, a thickness adjustment dial, a transmission platform, a traction roller group, and a transmission mechanism. The equipment adopts aluminum alloy and stainless steel plate structure, and has complete Spreader processes such as unwinding, scraping, drying, Air-Cooled, bonding, deviation correction, and winding.
Features
1. Adopt aluminum alloy + stainless steel plate body structure
2. Equipped with a glue width adjustment device and two discharge racks
3. Equipped with automatic deviation correction function to ensure material alignment
4. Spreader thickness range 0.005-2mm, accuracy +/- 5%
5. Adjustable coating speed 0~ 20m/min
6. Spreader roller and storage board with heating function
7. Equipped with Air-Cooled device and ventilation device
8. The box is made of Teflon material
9. Adjustable laminating width 100~ 300mm, accuracy 0.5mm
Principle
The equipment sends the substrate into the coating roller group through the feeding rack. The gluing width adjustment device controls the Spreader range, and the thickness adjustment dial meter precisely controls the thickness of the Spreader. After the substrate is glued, it is smoothly transferred to the traction roller group through the transmission platform, and the traction roller group completes the Spreader work through power transmission. During the cladding process, the deviation correction device automatically adjusts the left and right movement of the material rack to ensure that the material is aligned.
Applications
Laboratory Spreader, Paper Spreader, Material Cladding
Steps
1. Drag the substrate by hand between the upper and lower rollers of the traction roller
2. Tighten the handwheel on the rack to make the rubber ring of the upper roller of the traction roller contact the lower roller
3. Start the equipment, and the traction roller group pulls the substrate through the power transmission to complete the Spreader work
Notice
• The power supply of the equipment is 380V/2KW, it is necessary to ensure that the power supply meets the requirements
• The application width does not exceed 300mm
• The winding diameter should be within the range of 150mm to 500mm
• Dimensions are subject to actual customization
• Pay attention to the heating Temperature range of Spreader roller and storage plate when operating
