Overview
Automatic Film Applicator is a device suitable for non-elastic materials such as water-based adhesive Spreader paper, film, aluminum foil, plastic, non-woven fabrics, etc. It integrates automatic feeding, unwinding, scraping, drying and winding functions, making it an efficient oven coil Automatic film applicator.
Features
1. The body composed of aluminum alloy and high electrostatic spray plate is sturdy and durable.
2. Equipped with a gluing width adjustment device, composed of food-grade plastic and adjustable braces, for easy adjustment.
3. Double discharge rack design, with deviation correction device, automatic adjustment of material alignment.
4. The coating roller group is made of double-drum precision machining parts, with smooth transmission.
5. The thickness adjustment dial can precisely control the thickness of the Spreader.
6. The transmission platform is made of stainless steel to ensure smooth transmission of the substrate.
7. The traction roller group completes the Spreader work through power transmission.
8. The coating method can switch the drawdown blade and bar, and the coating speed is adjustable from 1 to 10m/min.
9. Effective application width 100~ 500mm adjustable, Spreader thickness range 0.005-3mm.
10. Drying Temperature range RT +~ 350 ℃, Drying length 1m * 3 sections, Power 1KW.
11. Automatic feeding system with heating and stirring function, foaming machine can automatically control the switch.
Principle
The device sends the substrate in through the discharge rack, and the coating roller group performs Spreader, and the thickness is adjusted by the dial meter. After Spreader, the substrate is smoothly transferred through the transmission platform, and the traction roller group pulls the substrate to complete the Spreader process. The drying tunnel provides heating drying, and the automatic feeding system ensures continuous feeding.
Applications
Paper, film, aluminum foil, plastic, non-woven fabric
Steps
1. Drag the substrate by hand between the upper and lower rollers of the traction roller.
2. Tighten the handwheel on the rack to make the rubber ring of the upper roller of the traction roller come into contact with the lower roller.
3. Drag the substrate over through the power transmission to complete the Spreader work.
Notice
• When adjusting the glue thickness, the specific thickness should be determined according to the indication of the percentage table.
• Dimensions of equipment are subject to actual customization, please confirm specifications before use.
• Pay attention to the high temperature of the drying tunnel during operation to avoid burns.
