YOKE FP6432 Flame photometer is an analytical instrument based on the principle of flame photometry, which is used to detect the concentration of potassium, sodium, lithium, calcium, barium and other elements in solution. The instrument has the function of concentration direct reading, adopts 7-inch color capacitive touch screen operation, has the characteristics of cloud interconnection, U disk data export, etc. Compact design, convenient operation, stable and reliable.
1. It has cloud connectivity capabilities.
2. It has the function of automatic calculation of correlation coefficient.
3. It has a U disk data export and a USB communication port.
4. The host uses a 7-inch color capacitive touch LCD screen.
5, with potassium, sodium, lithium, calcium, barium element concentration direct reading function.
6. It has the advantages of small size, convenient operation, and reliability.
7. Flame-out protection devices and gas leakage alarms are safe and reliable.
The FP6432 Flame photometer works based on the principle of flame photometry. It uses the thermal energy provided by the flame to excite alkaline earth metal atoms and make them jump to high energy levels. When the atoms fall back to the ground state, they will release a light spectrum with a specific wavelength (flame color reaction). The characteristic spectral lines are separated by equipped with corresponding filters and their light intensity is detected. Since the light intensity is proportional to the concentration of the element in the solution, quantitative analysis of the target element is achieved.
Testing of building materials such as cement, Glass, Pottery and porcelain, refractory materials, testing of fertilizers and soils, testing of mining, petroleum, metallurgy, chemical products, testing of pharmaceuticals, beverages and other foods, testing of municipal solid waste, testing of various experiments in scientific research, hygiene, teaching and other fields
• The instrument should be placed horizontally on a non-vibrating workbench to avoid direct exposure to strong light, without strong electromagnetic and magnetic field interference, and without the influence of strong airflow.
• Operating Environment Temperature should be between 10 ° C and 35 ° C, relative humidity should be ≤ 85%.
• There should be no flammable, explosive or corrosive gases on the use site of the product, and fire extinguishing equipment should be provided.
• Air compressor work about 100 hours, should cut off the power supply and discharge the water in the gas tank, the environment is humid need to shorten the drainage cycle.
• After each test, wash the instrument with distillation water for about 5 minutes to clean the atomization chamber and combustion head.
• If there is a fault, such as no discharge, no point fire, unstable flame, no sample or the display screen is not bright, please refer to the Troubleshooting table for inspection and processing.
