Overview
The DB22-VM260A series vibrators are used for periodic motion measurement to detect imBalances and deviations in moving machinery. Designed for on-site measurement of various mechanical vibrations to provide data for quality control, running time, and prior equipment maintenance. High-performance accelerometers for accurate, reproducible measurements.
Features
1. Conforms to the international standard ISO2954 for periodic motion measurement to detect imBalances and deviations in moving machinery.
2. Designed for on-site measurement of various mechanical vibrations to provide data for quality control, operating time and prior equipment maintenance.
3. Frequency range is wide, in Acceleration mode, Frequency can reach 5-10KHz.
4. Use Piezoelectric Acceleration Sensor to convert into vibration signal.
5. With bearing condition measurement function.
6. With AC signal output, it is convenient for auscultation and recording.
7. Optional headphones can be used as a stethoscope.
8. Use "USB data cable output" to communicate with PC.
Principle
Vibrometer uses Piezoelectric Acceleration Sensor to convert mechanical vibration into vibration signal, and detects the imBalance and deviation of moving machinery by measuring parameters such as displacement, speed and Acceleration.
Applications
Mechanical vibration measurement, quality control, equipment maintenance
Steps
1. Install batteries: Use 4 1.5V AAA AA AA batteries.
2. Connect Sensor: Use Piezoelectric Vibration Sensor.
3. Select Measurement mode: Select Displacement, Speed or Acceleration mode according to your needs.
4. Perform measurement: under operating conditions of temperature 0~ 50 ° C and Humidity < 90%.
5. Output data: communicate with PC through USB data cable output, or use AC signal output.
Notice
• Ensure that the Operating Ambient Temperature is within the range of 0~ 50 ° C.
• Humidity should be below 90%.
• Use the designated power supply to avoid improper operation.
• Periodically calibrate to maintain Precision +/- 5% + 2 words.
