Overview
Universal Testing Machine is a small, simple, multi-functional and High Accuracy testing instrument for thrust and tension. It is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire equipment, pens, locks, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, insertion force test, Destructiveness test, etc.
Features
1. High Accuracy and high resolution, digital display ignores poor.
2. N (newton), kg (kilogram), lb (pound), g (gram) four measurement units are available for selection and conversion.
3. Peak hold function, keep peak display until manually cleared.
4. It can be set to shut down automatically without operation for 10 minutes, or it can be shut down manually.
5. It can be powered by alkaline battery or 5V DC power supply.
Principle
Sensor measures the force applied to the test object, converts the force value signal into an electrical signal, and displays it digitally on the LCD screen after processing. Measurement modes (such as peak hold or real-time measurement), units, and zero correction can be switched by pressing buttons.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Steps
1. Use the unit key (UNIT) to perform unit conversion operations.
2. Use the power/return key (POWER/EXIT) to turn the machine on and off, return in data browsing mode or call up the automatic shutdown settings.
3. Use Peak Key (PEAK) to switch between Peak Hold mode and Real Time Measurement mode.
4. Use the zero correction key (ZERO) to perform the instrument zero correction operation.
Notice
* The allowable load is 150% F.s. There will be a beep alarm when it exceeds 110% F.s.
* Operating temperature is 0 ℃~ 40 ℃.
* Operating humidity should be less than 80%.
* The working environment should be free of seismic sources and corrosive media.
