Overview
The side pressure tensiometer is a digital explicit tensiometer with the advantages of High Accuracy, Easy Operation, Easy Carrying, etc., and has a peak holding test mode. Users can choose the corresponding specifications according to the test force value. The scientific use range is 10% to 100% of the full scale. It is recommended to avoid using the part below 1% of the full scale. It needs to be cleared before the test to eliminate the weight of the fixture. The instrument is dedicated to the measurement of wind towers, signal towers, power transmission systems and other rope tension.
Features
1. High Accuracy and resolution
2. Numbers are displayed, ignoring the difference
3. Three measurement units of N (newton), kg (kilogram), and lb (pound) are available and can be converted to each other
4. Peak hold function, keep peak display until manually cleared
5. Can be powered by alkaline battery or 5V DC power supply
Principle
The instrument converts the received force information into electrical signals and transmits it to the host through the measurement Sensor, and the host displays the measurement readings, units and operation prompt information through the display after processing.
Applications
Wind towers, signal transmission towers, power transmission systems
Steps
1. After the instrument and the tested object are in place, press the ZERO button to clear them.
2. Start the test and read the display reading
3. When using the peak hold function, manually clear to reset
Notice
- Scientific use test range is 10% to 100% of full scale, Measurement department recommends not to use less than 1% of full scale
- Press the ZERO button to clear to eliminate the weight of the fixture before starting the test after the instrument and the test object are in place
- Allowable load of 150% F.s, buzzer alarm when exceeding 110% F.s
- Operating temperature range 0 ° C~ 40 ° C
- Operating humidity should be less than 80%
- Working environment requires no source and corrosion medium around
