Overview
Universal Testing Machine UTTM4-DB25-204FM-50N is a small, simple, multi-functional, High Accuracy thrust and tension testing instrument. It is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire equipment, pens, locks, fishing gear, chemical industry, power machinery, scientific research institutions and other industries of push-pull load, plug force test and Destructiveness test.
Features
1. High Accuracy and high resolution, digital display ignores poor.
2. Provide four measurement units: N (newton), kg (kilogram), lb (pound), and g (gram), which can be converted into each other.
3. With peak hold function, the peak display can be maintained until manually cleared.
4. It can be set to automatically shut down without operation for 10 minutes, and manual shutdown is also supported.
5. It can be powered by alkaline battery or 5V DC power supply.
6. Equipped with a blue backlit display.
Principle
Sensors measure the force applied to the measured object and convert the force signal into an electrical signal, which is displayed on the LCD screen in digital form after processing. Users can choose real-time Measurement mode or peak hold mode to obtain the instantaneous force value or the maximum force value during the test.
Applications
Terminals, wire, rope, plastic, film, rubber, fabric, fishing line, respirator, etc
Steps
1. Use the power/return key (POWER/EXIT) to power on.
2. Use the zero correction key (ZERO) to calibrate the instrument.
3. Use the Units key (UNIT) to select the desired force unit (N, kg, lb, g).
4. Use the Peak Key (PEAK) to switch between Peak Hold mode and Real Time Measurement mode.
5. Conduct the test and read the force value (instantaneous value or peak value) on the display.
6. After the test is completed, you can manually clear the peak or wait for the automatic shutdown.
Notice
* The allowable load of the instrument is 150% F.s. If it exceeds 110% F.s, there will be a beep alarm. Please do not overload it for a long time.
* Please work in an environment with 0 ℃~ 40 ℃ and humidity < 80%.
* The working environment should be free of seismic sources and corrosive media.
* Can be powered by 2 AA batteries or 5V DC power supply.
* The instrument has an automatic shutdown function without operation for 10 minutes to save power.
