Overview
Rgd-01/300afcl Air-Cooled curing coil Film Applicator is a multifunctional composite equipment that integrates unwinding, scraping, Air-Cooled curing, Laminating correction and winding functions. Using reticulated roller painting technology, application width 300mm, equipped with heating chute and 1 meter Air-Cooled curing box, suitable for coil film and composite processes.
Features
1. Multi-function integration: with unwinding, scraping, Air-Cooled curing, Laminating deviation correction and winding functions
2. Reticulated roller painting cloth: Adopt reticulated roller painting cloth technology to ensure uniform Spreader
3. Adjustable parameters: application width 100~ 300mm adjustable, thickness range 0.005-3mm
4 heating system: feeding trough heating temperature room temperature~ 200 ℃, composite roller heating temperature up to 200 ℃
5. Air-Cooled curing: Equipped with 1m Air-Cooled curing box, Power 1KW
6. Precise control: Adjuster Graduation 0.001mm, bonding speed 1~ 10m/min adjustable
7. Automatic feeding: equipped with heating and melting (RT~ 100 ℃) + stirring and mixing (volume 30L) + automatic feeding module
Principle
The equipment transports the substrate through the unwinding device, and the scraping system uses the reticulated roller painting technology to evenly Spreader the material on the surface of the substrate. Then it enters the Air-Cooled curing box for curing treatment, and then compounds with another layer of substrate through the composite device, and finally completes the film roll collection through the winding device. The whole process realizes continuous automated operation.
Applications
Coil film, Material composite, Plastic processing, Encasement material production
Steps
1. Place the substrate reel in the unwinding device
2. Set application width and thickness parameters
3. Start the heating system, set the temperature of the feeding chute and the composite rubber roller
4. Turn on the automatic feeding module for material heating, melting and stirring
5. Adjust the fitting speed and start the equipment to run
6. Monitor Air-Cooled curing process
7. Collect the finished film roll through the winding device
Notice
• Power supply voltage is 220V before operation
• Ensure that the maximum width of discharge and receipt does not exceed 300mm
• The heating temperature must not exceed the upper limit of 200 ° C
• The bonding speed is controlled within the range of 1~ 10m/min
• Regularly check the running status of all parts of the equipment
• Note that the Dimension of the equipment is about 1800 * 800 * 1600mm to ensure sufficient installation space
