Overview
Universal Testing Machine UTTM7-DB25-207FM-1KN is a small, simple, multi-functional, High Accuracy thrust and tension testing instrument. It is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire equipment, pens, locks, fishing gear, chemical industry, power machinery, scientific research institutions and other industries of push-pull load, plug force test and Destructiveness test.
Features
1. High Accuracy and high resolution, digital display ignores poor.
2. Provide four measurement units: N (newton), kg (kilogram), lb (pound), and g (gram), which can be converted into each other.
3. With peak hold function, the peak display can be maintained until manually cleared.
4. It can be set to automatically shut down without operation for 10 minutes, and manual shutdown is also supported.
5. Support the use of alkaline batteries or 5V DC power supply two power supply methods.
Principle
The testing machine measures the thrust or pull force of the measured object through the Sensor, and converts the force value signal into an electrical signal, which is processed and displayed in digital form on the LCD screen. Users can choose the peak hold mode to record the maximum force value during the test, or observe the instantaneous force value change in real-time mode.
Applications
Terminals, wire, rope, plastic, film, rubber, fabric, fishing line, respirator, etc
Steps
1. Press the power/return button (POWER/EXIT) to turn it on.
2. Use the Units key (UNIT) to select the desired force unit.
3. In the no-load state, press the zero correction button (ZERO) to zero the instrument.
4. Press the peak key (PEAK) to switch between peak hold mode and real-time test mode.
5. During the test, press SAVE/▲ to save the current measurement reading.
6. Press the read/subtract key (READ/T) to enter the data browsing mode to view the existing data.
7. In data browsing mode, use the save/add keys (SAVE/▲) and read/subtract keys (READ/T) to browse up or down.
8. Press the Delete key (DEL) to delete the saved data.
9. Long press the power/return key (POWER/EXIT) to adjust the automatic shutdown time setting, and use the read/subtract key (READ/T) and the save/add key (SAVE/▲) to adjust.
10. Press the power/return button (POWER/EXIT) to return or shut down.
Notice
* Do not exceed the allowable load of the instrument (150% full scale), the instrument will emit a beep alarm when it exceeds 110% full scale.
* Operating temperature from 0 ℃ to 40 ℃ and humidity less than 80% environment.
Ensure that there are no sources and corrosive media around the working environment.
* The instrument can be powered by 2 AA alkaline batteries or an external 5V DC power supply.
The instrument has an automatic shutdown function without operation for 10 minutes, and can also be shut down manually to save power.
* Optional ranges include 2N, 5N, 10N, 20N, 50N, 100N, 200N, 500N, 1KN, please choose the appropriate range according to the test requirements.
